Portable Fume Exhauster

Features

• AMCA Type B or C, spark resistant construction are standard for all models.
• Heavy-duty steel blower housing on all EBR models. Housings are black powder coated for a long life. EBM models have cast aluminum blower housings.
• Rugged steel base with black powder coating resists rusting
• Tote handle with soft foam grip for ease of moving
• Three rubber pads under the base to eliminate creeping and vibration during operation
• Totally Enclosed Fan Cooled (TEFC) motors are standard.
• Motors are continuous duty, full horsepower rated. NOT duty rated.
• All models are available with 115/230 Volt, 1 Phase, 60 Cycle or 230/460 Volt, 3 Phase, 60 Cycle motors. 575 Volt and 50 Cycle motors are also available. EXP motors are available for most models.
• Single Phase, TEFC motors (up to 1 HP) come with an 8-foot cord, 3-prong grounded plug and a switch pre-wired for 115 Volt, 60 Cycle.
• Suction nozzle and ten feet of hose included as standard
• One size hose fits inlet or discharge
• Inlet and discharge guards, required by OSHA, are standard.

Benefits

• Location: Fume exhauster frame can be bolted to a table, wall, or beam as a permanent location. Or they can be carried or bolted to a two-wheeled dolly or four-wheeled dolly cart for portability from one location to another. More flexibility.
• Spark Resistant Construction: All models are AMCA Type B spark resistant so they can be used in explosive atmosphere locations. Some locations will also require an Explosion Proof (EXP) motor as required by the NEC (National Electric Code) and/or the NFPA (National Fire Protection Association). Much safer.
• Safer Working Environment: Collecting and exhausting fumes and smoke “at the source”, provides a much healthier working environment. Protects workers.
• Rugged Construction: Heavy-duty construction of all fan components provide long, dependable service. There are many Cincinnati Fan Fume-Master Fume Exhausters still in operation in small welding shops and factories for over 20 years. Many years of dependable service.
• Made in the U.S.A.: In an era when small machinery manufacturing is continually going overseas, we are proud that Cincinnati Fan Fume-Master Fume Exhausters are still made and assembled in our factory in Mason, Ohio. You will find imported products, some of which are near copies of our design and/or claim to be as efficient or deliver more CFM. If you do, first ask them for certified performance data. Compare the features, benefits, and component material. We also offer many accessory nozzles, reducers, hoses, clamps, and dollies to fit our units. And, who will you call for assistance or service? Help support the U.S.A.
• Engineering Assistance: Our Product Specifications contain information on how to select the proper size fume exhauster. No guesswork.